This is a step by step guide to flash(install) Karbonn Titanium S200 HD Official ROM.
Have a look at these screen-shots :good:
![Karbonn_Titanium_S200_HD_V07]( "Karbonn_Titanium_S200_HD_V07")
![Karbonn_Titanium_S200_HD_V09_20151215]( "Karbonn_Titanium_S200_HD_V09_20151215")
Prerequisite:
>Windows 7 PC.
>Spreadtrum USB Drivers
>SPD Upgrade Download Tool R2.9.9015
>Stock ROM (Karbonn_Titanium_S200_HD_V09_20151215.pac).
>USB cable & phone battery should be at-least 40%.
>WinRAR to extract .rar files.
Flashing Procedure
Step 1: Download Spreadtrum USB Drivers.rar on your Windows & extract it using winRAR.
Step 2: Now, right click on Computer & then Properties & then select Device Manager.
Step 3: Right click on your computer name & select Add legacy hardware
![]()
Step 4: Now, Click on Action Menu and Select Add legacy hardware.
Step 5: In the Add Hardware Wizard > Click on Next to continue.
![]()
Step 6: Select Install the hardware that I manually select from a list (Advanced) and click on Next to continue.
![]()
Step 7: Now, under common hardware types select on Show All Devices and click Next to continue.
![]()
Step 8: Now, click on Have Disk and using the browse button locate the Spreadtrum Driver (SciU2S.INF).
![]()
![]()
![]()
![]()
Step 9: Once your driver is listed in the blank area, click on Next to continue.
![]()
Step 10: Now, again click on Next to continue.
![]()
Step 11: Now, Select Install this driver software anyway. Wait until Device manager installs the Spreadtrum driver on your computer.
![]()
Step 12: Click on Finish button.
![]()
Step 13: Extract SPD Upgrade Tool R2.9.9015.rar and open UpgradeDownload.exe.
![]()
Step 14: Click on Load Packed button & Select the ROM with extension .pac at end
![]()
![]()
Step 15: Switch off your Mobile & connect it to PC using USB cable & quickly press Volume down key for 15 seconds. Flashing will be started. Do not touch your phone or USB cable and wait until it shows Passed or Success. It may take 10-15 minutes.
Step 16: Press Stop downloading after successful flashing. Your phone gonna reboot automatically, do not panic wait few minutes until home screen opens up. ;)
Step 17: Done!
Download Spreadtrum USB Drivers:
https://drive.google.com/open?id=0B4...HNBTjNlTjdsN0k
SPD Upgrade Tool R2.9.9015:
https://drive.google.com/open?id=0B4...DZJZWNNc2JWN28
Download Stock ROM:
https://drive.google.com/uc?id=0B-M5...xport=download
Have a look at these screen-shots :good:
Prerequisite:
>Windows 7 PC.
>Spreadtrum USB Drivers
>SPD Upgrade Download Tool R2.9.9015
>Stock ROM (Karbonn_Titanium_S200_HD_V09_20151215.pac).
>USB cable & phone battery should be at-least 40%.
>WinRAR to extract .rar files.
Flashing Procedure
Step 1: Download Spreadtrum USB Drivers.rar on your Windows & extract it using winRAR.
Step 2: Now, right click on Computer & then Properties & then select Device Manager.
Step 3: Right click on your computer name & select Add legacy hardware
Step 4: Now, Click on Action Menu and Select Add legacy hardware.
Step 5: In the Add Hardware Wizard > Click on Next to continue.
Step 6: Select Install the hardware that I manually select from a list (Advanced) and click on Next to continue.
Step 7: Now, under common hardware types select on Show All Devices and click Next to continue.
Step 8: Now, click on Have Disk and using the browse button locate the Spreadtrum Driver (SciU2S.INF).
Step 9: Once your driver is listed in the blank area, click on Next to continue.
Step 10: Now, again click on Next to continue.
Step 11: Now, Select Install this driver software anyway. Wait until Device manager installs the Spreadtrum driver on your computer.
Step 12: Click on Finish button.
Step 13: Extract SPD Upgrade Tool R2.9.9015.rar and open UpgradeDownload.exe.
Step 14: Click on Load Packed button & Select the ROM with extension .pac at end
Step 15: Switch off your Mobile & connect it to PC using USB cable & quickly press Volume down key for 15 seconds. Flashing will be started. Do not touch your phone or USB cable and wait until it shows Passed or Success. It may take 10-15 minutes.
Step 16: Press Stop downloading after successful flashing. Your phone gonna reboot automatically, do not panic wait few minutes until home screen opens up. ;)
Step 17: Done!
Download Spreadtrum USB Drivers:
https://drive.google.com/open?id=0B4...HNBTjNlTjdsN0k
SPD Upgrade Tool R2.9.9015:
https://drive.google.com/open?id=0B4...DZJZWNNc2JWN28
Download Stock ROM:
https://drive.google.com/uc?id=0B-M5...xport=download