Fully Working CWM 6.0.5.1 for InFocus M512
As you may know, PochiMak released CWM 6 for the InFocus M512. But it had a problem... A huge one. If you flashed the recovery, you were stuck in recovery bootloop, and couldn't get out until you flashed the stock one back. Well luckily _zerg@4pda.ru released a fully working CWM6 for our device, no bootloops or anything.
Everything (almost) works just fine. Backups to both internal (sdcard) and external (sdcard1) storages work well.
BUGS
-Backup date is in the year 1970 :D
-Colors are a bit innacurate.
Other than that, everything works perfectly :)
INSTALLATION:
1.Connect your phone via USB to your PC.
2.Enable MTP.
3.Enable USB Debugging. Settings>Developer Options> tick USB Debugging.
4.On your computer, 2 drives will appear: One of them is a CD-Rom which contains all drivers.
5.Click on that CD-Rom and it will install all drivers.
6.Plug phone in again.
7.Download the .ZIP file and extract it somewhere.
8.Click on _install_cwm_6.0.5.1.cmd
9.Your phone will ask you something, just tick "always allow from this computer" and hit OK.
10.Your phone will reboot into DL Mode, then it will reboot again.
11.Recovery is installed.
How to go back to stock recovery:
If you are on 2260 firmware, just click on _install_recovery_2260.cmd and stock recovery will be back.
Entering recovery:
1.Manually:
Power off the phone.
Hold Volume+ and Power.
Rapidly connect USB cable.
2.With ADB:
Click on _reboot_to_recovery.cmd
DOWNLOAD:
http://4pda.ru/forum/dl/post/6478521/cwm_6.0.5.1.zip or mirror.
Credits:
_zerg@4pda.ru - for making this recovery.
Cat_Man@4pda.ru - for making installation script.
As you may know, PochiMak released CWM 6 for the InFocus M512. But it had a problem... A huge one. If you flashed the recovery, you were stuck in recovery bootloop, and couldn't get out until you flashed the stock one back. Well luckily _zerg@4pda.ru released a fully working CWM6 for our device, no bootloops or anything.
Everything (almost) works just fine. Backups to both internal (sdcard) and external (sdcard1) storages work well.
BUGS
-Backup date is in the year 1970 :D
-Colors are a bit innacurate.
Other than that, everything works perfectly :)
INSTALLATION:
1.Connect your phone via USB to your PC.
2.Enable MTP.
3.Enable USB Debugging. Settings>Developer Options> tick USB Debugging.
4.On your computer, 2 drives will appear: One of them is a CD-Rom which contains all drivers.
5.Click on that CD-Rom and it will install all drivers.
6.Plug phone in again.
7.Download the .ZIP file and extract it somewhere.
8.Click on _install_cwm_6.0.5.1.cmd
9.Your phone will ask you something, just tick "always allow from this computer" and hit OK.
10.Your phone will reboot into DL Mode, then it will reboot again.
11.Recovery is installed.
How to go back to stock recovery:
If you are on 2260 firmware, just click on _install_recovery_2260.cmd and stock recovery will be back.
Entering recovery:
1.Manually:
Power off the phone.
Hold Volume+ and Power.
Rapidly connect USB cable.
2.With ADB:
Click on _reboot_to_recovery.cmd
DOWNLOAD:
http://4pda.ru/forum/dl/post/6478521/cwm_6.0.5.1.zip or mirror.
Credits:
_zerg@4pda.ru - for making this recovery.
Cat_Man@4pda.ru - for making installation script.